Home Hardware › hillman 7788 zinc flat head

Hillman #6 x 1-1/4 In. Phillips Flat Head Zinc Chromate Wood Screw (15 Ct.) 5775

Zinc Wood Screws are designed to join two pieces of wood. Smooth shank allows the screw to pull two pieces of wood together for a tight join while preventing the wood from pulling or splitting. Requires a pilot hole for installation. Common... more

Hillman Fasteners 40066 No. 8 x 1.25 in. Phillips Flat Head Zinc Wood Screw

No. 8 x 1.25 in. Phillips flat head zinc wood screw.Specifications Dimension - 2.2 x 2.7 x 1.7 in. Item weight - 0.66 lbs.Features 100 pack Wood screws are to be used when joining two pieces of wood Wood screws also taper along the threaded portion... more

Hillman 101146 0.25-24 x 3 in. Phillips Flat Head Zinc Plated Steel Machine Screw

Zinc flat-head Phillips-drive machine screws have a machine-cut thread throughout the length of their shank. Fasten with a Phillips screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed use with... more

Hillman #10 x 2 In. Phillips Flat Head Zinc Chromate Wood Screw (6 Ct.) 5820

Zinc Wood Screws are designed to join two pieces of wood. Smooth shank allows the screw to pull two pieces of wood together for a tight join while preventing the wood from pulling or splitting. Requires a pilot hole for installation. Common... more

Hillman No. 10-24 X 1-1/2 in. L Slotted Flat Head Zinc-Plated Steel Machine Screws 8 pk

Flat-head stove bolts are used to fasten metal parts together that are going into a tapped hole or through a hole and being held by a nut. A nut of the same finish and threading for proper fit is included. Fasten with a screwdriver to reduce the risk... more

Hillman Fasteners 40126 No.10 x 1.25 in. Phillips Flat Head Zinc Wood Screw- 100 Pack

Join two pieces of wood with the Phillips flat head zinc wood screw. Tapered threading optimizes holding power in wood. Pre-drilling is required. This 100 pack of No.10 x 1.25 in. screws is a must-have for any woodworking project.Specifications Size -... more

Hillman 5814 Flat Head Zinc Wood Screw #10 x 1-1/2 8 Pack Each

#10 x 1-1/2 Phillips Flat head. Zinc wood screw. 8 Pack #10 x 1-1/2 Phillips Flat head Zinc wood screw. more

The Hillman Group zinc 101066 8-32-Inch x 3-Inch Flat Head Phillips Machine Screw 100-Pack 3 inches

The Hillman Group zinc 101066 8-32-Inch x 3-Inch Flat Head Phillips Machine Screw 100-Pack 3 inches more

Hillman Group RSC 57817 2.5 in. No.8 Phillips Flat Head Zinc Wood Screw

A wood screw is a thread forming screw with sharp thread at a coarse pitch. It is used for directly fastening two wood surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a tight joint to prevent... more

Hillman 7755 6-32 x 0.5 in. Zinc Plated Slotted Flat Head Machine Screws Carded 10 - pack of 10

Hillman 7755 6-32 x 0.5 in. Zinc Plated Slotted Flat Head Machine Screws Carded 10 - pack of 10Specifications Diemension: 3.3 H x 5 W x 4.1 L Weight: 1 lbsFeatures Slotted Flat head Carded Size: 6-32 x 0.5 - SKU: ACHR15408 more

Hillman No. 10-32 X 1 in. L Phillips Flat Head Zinc-Plated Steel Machine Screws 100 pk

Zinc flat-head Phillips-drive machine screws have a machine-cut thread throughout the length of their shank. Fasten with a Phillips screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed use with... more

Hillman 56151 1.5 in. Flat Head Steel No.6 Zinc Wood Screw -

A wood screw is a thread forming screw with sharp thread at a coarse pitch. It is used for directly fastening two wood surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a tight joint to prevent... more

Hillman No. 8-32 X 1-1/4 in. L Phillips Flat Head Zinc-Plated Steel Machine Screws 100 pk

Zinc flat-head Phillips-drive machine screws have a machine-cut thread throughout the length of their shank. Fasten with a Phillips screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed use with... more

Hillman 40100 9 x 1.25 in. Zinc Plated Phillips Flat Head Wood Screw

A wood screw is a thread forming screw with sharp thread at a coarse pitch. It is used for directly fastening two wood surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a tight joint to prevent... more

Hillman #10 x 1-1/4 In. Phillips Flat Head Zinc Chromate Wood Screw (10 Ct.)

Zinc Wood Screws are designed to join two pieces of wood. Smooth shank allows the screw to pull two pieces of wood together for a tight join while preventing the wood from pulling or splitting. Requires a pilot hole for installation. Common... more

Hillman 101140 0.25-20 x 1.25 in. Phillips Flat Head Zinc Plated Steel Machine Screw

A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines tools etc. Fasten with... more

Hillman 101137 0.25-20 x 0.75 in. Phillips Flat Head Zinc Plated Steel Machine Screw

A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines tools etc. Fasten with... more

Hillman Fasteners 6 x 0.75 in. Interior Flat Head One Screw - Zinc Pack of 5

Features Zinc plated great for interior applications in multi-materials not recommended for exterior projects or treated lumber Flat Head design with star drive provides clean countersinking in wood and is ideal for wood-to-wood wood-to-metal and... more

The Hillman Group 40066 8 x 1-1/4-Inch Flat Head Phillips Wood Screw 100-Pack Zinc

The Hillman Group 40066 8 x 1-1/4-Inch Flat Head Phillips Wood Screw 100-Pack Zinc Product Description The Hillman Group 40066 8 x 1-1/4-Inch Flat Head Phillips Wood Screw 100-Pack From the Manufacturer A wood screw is a thread forming screw with sharp... more

Hillman No. 6 x 5/8 in. L Phillips Flat Head Zinc-Plated Steel Wood Screws 100 pk

A wood screw is a thread forming screw with sharp thread at a coarse pitch. It is used for directly fastening two wood surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a tight joint to prevent... more

Hillman 10 in. x 3/4 in. L Phillips Flat Head Zinc-Plated Steel Sheet Metal Screws 100 pk

Hillman Sheet Metal Screws No. 10 X 3/4 Phillips Flat Head Box 100 more

Hillman 101080 10-24 x 1.25 in. Phillips Flat Head Zinc Plated Steel Machine Screw

Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed use with nuts of the same... more

Hillman Group RSC 56145 1 in. No.10 Phillips Flat Head Zinc Wood Screw

A wood screw is a thread forming screw with sharp thread at a coarse pitch. It is used for directly fastening two wood surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a tight joint to prevent... more

Hillman 101149 0.25 x 4 in. Phillips Flat Head Zinc Plated Steel Machine Screw

Zinc flat-head Phillips-drive machine screws have a machine-cut thread throughout the length of their shank. Fasten with a Phillips screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed use with... more

Hillman #6 x 5/8 In. Phillips Flat Head Zinc Sheet Metal Screw (100 Ct.) 80162

These sheet metal screws or tapping screws are highly versatile and are used to attached metal wood fiberglass and plastic. The sharp threads draw material together and ensure a secure hold. Sheet metal screws are fully threaded with a sharp point.... more

Hillman 57854 No. 12 x 1 in. Phillips Flat Head Zinc-Plated Steel Sheet Metal Screws Pack of 100

Sheet metal screws or tapping screws are highly versatile. Though they are designed to attach metal to metal they re also used to attach metal to wood fiberglass and plastic. Great for general repair around the house their sharp threads draw materials... more

Hillman No. 8 x 1-3/4 in. L Phillips Flat Head Zinc-Plated Steel Wood Screws 100 pk

Hillman Wood Screws No. 8 X 1-3/4 Phillips Flat Head Box 100 more

Hillman 57854 No. 12 x 1 in. Phillips Flat Head Zinc-Plated Steel Sheet Metal Screws Pack of 100

Hillman 57854 No. 12 x 1 in. Phillips Flat Head Zinc-Plated Steel Sheet Metal Screws Pack of 100 more

Hillman No. 10 x 1-1/4 in. L Phillips Flat Head Zinc-Plated Steel Wood Screws 100 pk

A wood forming thread is a sharp threaded thread at a coarse pitch. It is used for directly fastening two wooden surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a joint to prevent the wood... more

Hillman #10 x 3-1/2 In. Flat Head Phillips Zinc Wood Screw (100 Ct.)

Zinc Wood Screws are designed to join two pieces of wood. The smooth shank allows the screw to pull two pieces of wood together for a tight join while preventing the wood from pulling or splitting. The standard point on these screws requires a pilot... more

Hillman 7836 0.25 - 20 x 1.5 Zinc Plated Flat Head Slotted with Nuts Machine Screw

Flat-head stove bolts are used to fasten metal parts together that are going into a tapped hole or through a hole and being held by a nut. A nut of the same finish and threading for proper fit is included. Fasten with a screwdriver to reduce the risk... more

Hillman Fasteners 40150 Wood Screws Flat Head Zinc Phillips No. 12 x 1-1/4

A wood screw is a thread forming screw with sharp thread at a coarse pitch. It is used for directly fastening two wood surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a tight joint to prevent... more

Hillman 101036 6-32 x 0.75 in. Zinc Plated Flat Head Machine Screw

A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines tools etc. Fasten with... more

Hillman 7839 0.25 - 20 x 2 in. Zinc Plated Flat Head Slotted with Nuts Machine Screw

Flat-head stove bolts are used to fasten metal parts together that are going into a tapped hole or through a hole and being held by a nut. A nut of the same finish and threading for proper fit is included. Fasten with a screwdriver to reduce the risk... more

Hillman Group RSC 57816 3 in. No.12 Phillips Flat Head Zinc Wood Screw

We provide a wide range of products to satisfy all houseware and supplies. We are dedicated to give everyone the very besthouseware supplies for allhome needs with a focus on dependability our client satisfaction and great quality. We provide... more

Hillman 101134 0.25-20 x 0.5 in. Phillips Flat Head Zinc Plated Steel Machine Screw

Zinc flat-head Phillips-drive machine screws have a machine-cut thread throughout the length of their shank. Fasten with a Phillips screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed use with... more

Hillman 101086 10-24 x 3 in. Phillips Flat Head Zinc Plated Steel Machine Screw

Zinc flat-head Phillips-drive machine screws have a machine-cut thread throughout the length of their shank. Fasten with a Phillips screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed use with... more

Hillman 101075 10-24 x 0.5 in. Phillips Flat Head Zinc Plated Steel Machine Screw

A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines tools etc. Fasten with... more