Home Hardware › Sliding Doors › prime line drawer track back

Prime-Line N 6517 Bypass Sliding Closet Door Top-Hung Back Rollers and Brackets 2-Pk. - Quantity 6

2 Pack side mount top hung adjustable roller bracket with a 3/4 in. ball bearing convex nylon roller and 1/2 in. offset that fits onto the back wardrobe door panel. It fits 3/4 in. to 1-3/8 in. thick doors. more

Prime-Line 1/4 x 48 in. Stainless Steel Sliding Patio Door Repair Track in Gray | 48.25 H x 0.25 W x 3 D in | Wayfair D 1579-C

This is a 48 in. stainless steel track cap used to repair damaged patio or wardrobe door tracks. It can be cut to desired length. After the old track is prepared by grinding any spots that are wider than the original track width and cleaning it, the... more

Prime-Line 9/16 in. Offset Sliding Wardrobe Back Door Roller Assembly, Steel in Gray | 2.88 H x 1.45 W x 0.56 D in | Wayfair N 6718

Features:Set includes 2 door rollersSilver plated finishFits old style Kenna frameComes with center groove plastic wheelRollers are for a wardrobe doorProduct Type: Shutter/Door AccessoryFunction: Style: IndustrialFinish: SilverHand Painted: NoPrimary... more

Prime-Line 4 in. Sliding Screen Door Top Tension Spring, Fits Andersen, Steel in Gray | 6.4 H x 3.75 W x 1.13 D in | Wayfair B 803

Is your screen door rattling in the track? This top-mounted heat-treated high-tension steel spring is used on Andersen sliding screen doors. It provides tension on the top of the sliding screen door as it slides back and forth. It not only provides the... more

Prime-Line N 6718 Offset Sliding Wardrobe Back Door Roller Assembly 9/16 In. 2-Pk. - Quantity 6

9/16 in. Offset Sliding Wardrobe Back Door Roller Assembly (2-pack). This is a side mounted top hung adjustable wardrobe door roller assembly with a single 7/8 in. grooved nylon wheel for the back door panel. The stamped steel bracket assembly is... more

Prime-Line MP6559 White Plastic Sliding Panel Door Bottom Guides (Single Pack)

Prime-Line MP6559 White Plastic Sliding Panel Door Bottom Guides (Single Pack) This is a set of handed white plastic guides that have a spring-loaded insert tip that fits bottom grooved tracks. They mount into the back bottom frame section of steel... more

Prime-Line D 1594 Steel Ball Bearing Sliding Patio Door Roller Assembly 1-1/2 In. - Quantity 6

Back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more

Prime-Line N 6840 Flat Closet Door Roller for Sliding Doors Nylon 7/8 In. 2-Pk. - Quantity 6

2 Pack Adjustable top hung side mounted bracket with a 3/8 in. offset and 7/8 in. flat nylon roller used on the back of a sliding door panel. It fits 3/4 in. to 1-3/8 in. thick doors. Used by Johnson Hardware. more

Prime-Line D 1600 Adjustable 1-1/2 In. Steel Sliding Patio Door Roller Assembly - Quantity 6

Adjustable 1-1/2-in Steel Sliding Patio Door Roller Assembly. This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide with a 7/8 in. flare and is 1-9/16 in. tall.... more

Prime Line D1822 131468 Sliding Glass Door Roller Steel 1-1/2 Inch

Key Features Adjustable steel housing assembly Yellow zinc-plated for corrosion resistance Sliding glass door rollers steel roller d x w 1 inch -1/2 x 5/16 tab style=plain back Steel Glass Door Roller. Housing Width: 3/4 inches. Roller Edge Type:... more

White Plastic Sliding Panel Door Bottom Guides (2-pack)

This is a set of handed white plastic guides that have a spring-loaded insert tip that fits bottom grooved tracks. They mount into the back bottom frame section of steel panel style doors and are held in place by a screw. Used on Glide-All door systems. more

White Plastic Sliding Panel Door Bottom Guides (2-pack)

This is a set of handed white plastic guides that have a spring-loaded insert tip that fits bottom grooved tracks. They mount into the back bottom frame section of steel panel style doors and are held in place by a screw. Used on Glide-All door systems. more

Plastic Sliding Closet Door Guide for 1-3/8 Inch Thick Doors Tan Set of 1

This Prime-Line N 7527 Closet Door Bottom Guide helps keep by-passing sliding door panels centered on their respective tracks. Made of plastic this sliding closet door bottom guide is finished in tan. Use the closet sliding door guide for a variety of... more

Sliding Patio Door Roller Assembly With 1-1/4 Steel Ball Bearing Roll Each

1-1/4 Steel door roller assembly with ball bearing; plain back housing. Carded. more

Adjustable Sliding Patio Door Tandem Roller Assembly 1-1/4 Steel 1-11 Each

Easily operate your door with the Prime-Line Products back patio door roller assembly. The housing is 11/16 in. wide and 1 in. tall with a 1/4-20 threaded mounting hole on the back. The steel construction and sleek finish make it as stylish as it is... more

Adjustable Sliding Patio Door Tandem Roller Assembly 1-1/4 Steel 1-3/ Each

This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other vinyl patio door manufacturers. The housing is 3/4 in. wide and 1... more

Plastic Top Guide Sliding Mirror Door Assembly - Pack of 2

2 Pack top guide for Acme mirrored panel doors. The stamped steel housing snaps into a slot on the inside of the door frame. The plastic top guide slides in an upper track above the door. For the bottom roller assembly use Prime-Line part N 6790.... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Roller Assembly, for Fleetwood Doors (Single Pack) in Gray | 5.4 H x 3.75 W x 1.15 D in | Wayfair

This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... more

Prime-Line Stainless Steel Mortise Lock for Patio Sliding Doors Constructed of Wood, Aluminum, & Vinyl, 3-11/16 Inch, 45 Degree Keyway , Silver | Wayfair

Easily operate your door with the Prime-Line Products back patio door roller assembly. The housing is 11/16 in. wide and 1 in. tall with a 1/4-20 threaded mounting hole on the back. The steel construction and sleek finish make it as stylish as it is... more

Prime-Line Adjustable 1-1/2 in. Steel Sliding Patio Door Roller Assembly (Single Pack) in Brown | 6.4 H x 3.75 W x 1.15 D in | Wayfair D 1600

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back... more

Prime-Line Keller Sliding Glass Door Roller Assembly (Single Pack) in Yellow | 6.4 H x 3.75 W x 0.85 D in | Wayfair D 1860

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall with a 13/16 in. flare. It is rear adjusting with a 1/4-20 threaded mounting hole on... more

Prime-Line 1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly, for Nu-Air Doors (Single Pack) in Yellow | 5.4 H x 3.75 W x 0.9 D in | Wayfair

This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... more

Prime-Line 1-1/2 in. Steel, Sliding Door Tandem Roller Assembly, for Rolleze Glass Doors (Single Pack) in White | 5.4 H x 3.75 W x 0.85 D in | Wayfair

This is a unique housing patio door roller assembly. It is 23/32 in. wide, 1-7/8 in. tall, and 2-1/8 in. long with a 1-1/4 in. diameter steel ball-bearing roller. To install, remove the screw from the back and insert the assembly into the bottom rail... more

Prime-Line 1-1/4 in. Ball Bearing Sliding Door Roller Assembly, for Peachtree Citation Doors (Single Pack) in Brown | Wayfair D 1611

This is a unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used exclusively on Peachtree Citation III series doors. The stamped steel housing has a unique design that is 7/8 in. wide, 1-9/16 in. tall and 2-1/4... more

Prime-Line 7/8 in. Nylon, Flat Closet Door Roller, for Sliding Doors in White/Yellow | 2.5 H x 1.75 W x 0.6 D in | Wayfair N 6840

This is an adjustable top hung, side mounted bracket with a 1/16 inch offset and 7/8 inch flat nylon roller used on the back of a sliding door panel. It fits 3/4 inch to 1-3/8 inch thick doors. Used by a variety of sliding closet or wardrobe doors. |... more

Prime-Line Door-Mount Sliding Closet Door Roller in Gray/White | 9.44 H x 3.81 W x 1.5 D in | Wayfair N 7544

This is a front and back roller for the wardrobe door. It has concave rollers. Used on older Kenna frame sliding closet or wardrobe doors. | Prime-Line Door-Mount Sliding Closet Door Roller in Gray/White | 9.44 H x 3.81 W x 1.5 D in | Wayfair more