You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The housing is 3/4 in. wide with a 7/8 in. flare and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is... ... more | go to store |
| Best Seller  | PRIME-LINE B 702 1 in. Steel Screen Door Roller (2 Pack) Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This steel housing and... ... more
PRIME-LINE B 702 1 in. Steel Screen Door Roller (2 Pack) Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This steel housing and... | go to store |
 | PRIMELINE TOOLS N 6620 1-1/4 in. Nylon Pocket Door Roller Assembly with Steel This pocket door roller assembly is constructed of a nylon tire, steel ball bearings and a diecast bracket. The roller on this assembly features a convex (round) edge wheel and it mounts with two (2) fasteners. It is a top-mount assembly, typically... ... more
PRIMELINE TOOLS N 6620 1-1/4 in. Nylon Pocket Door Roller Assembly with Steel This pocket door roller assembly is constructed of a nylon tire, steel ball bearings and a diecast bracket. The roller on this assembly features a convex (round) edge wheel and it mounts with two (2) fasteners. It is a top-mount assembly, typically... | go to store |
 | PRIMELINE TOOLS N 6662 Top Mount Pocket Door Roller Mounting Bracket (Single This is a top, center mounted pocket door bracket. Usually used with the Acme 4-wheeled assembly. It made of steel with a 5/16-18 threaded rod attached. A locking nut and T-nut are attached to the threaded rod that the Prime-Line part N 6659 slips... ... more
PRIMELINE TOOLS N 6662 Top Mount Pocket Door Roller Mounting Bracket (Single This is a top, center mounted pocket door bracket. Usually used with the Acme 4-wheeled assembly. It made of steel with a 5/16-18 threaded rod attached. A locking nut and T-nut are attached to the threaded rod that the Prime-Line part N 6659 slips... | go to store |
 | Product Name : SlidingDoor Roller;Material : Metal, Plastic Color : Silver Tone, White;Overall Size : 5.8 x 3.1 x 1.3cm/ 2.3" x 1.2" x 0.5"(L*W*H) Roller Dia.(Approx ... more | FREE shipping go to store |
 | Sliding Door Roller Assembly, Sliding Patio Door Wheels with Ball Bearings - White Nickel Specifications: Color: White Nickel Material: Stainless Steel Slot Width: 5.5mm / 0.21'' Wheel Diameter: 7.3mm / 0.28'' Size: 60mm x 6.5mm x 23mm / 2.36'' x 0.25'' x 0.9'' (L*W*H) Package Content: 2pcs x Sliding Patio Door Wheels Description: [Material… ... more | FREE shipping go to store |
 | Sliding Door Roller Assembly, Sliding Patio Door Wheels with Ball Bearings - White Nickel Specifications: Color: White Nickel Material: Stainless Steel Slot Width: 5.5mm / 0.21'' Wheel Diameter: 7.3mm / 0.28'' Size: 60mm x 6.5mm x 23mm / 2.36'' x 0.25'' x 0.9'' (L*W*H) Package Content: 2pcs x Sliding Patio Door Wheels Description: [Material… ... more | $8.49 $7.22 FREE shipping go to store |
 | This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide, 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back... ... more | go to store |
 | This is a unique, one of a kind, trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... ... more | go to store |
 | This is a plain back tandem roller assembly used by Smith and Carry and a variety of other sliding patio door manufacturers of metal framed patio doors. It has an in-line tandem inner housing with 1-1/2 in. concave steel ball bearing rollers set in a... ... more | go to store |
 | This sliding screen door roller assembly fits onto the spring-loaded arm of a Columbia corner insert. The roller housing is stamped steel with a 1 in. steel ball bearing roller installed. These rollers are a replacement roller for the discontinued... ... more | go to store |
 | This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
 | These patio door and screen door rollers are constructed of a stainless steel wheel and stainless steel ball bearings. These replacement wheels have a concave (center grooved) edge and are for use over raised-edge, sliding door tracks. This type of... ... more | go to store |
 | This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
 | This roller is constructed from steel. It comes affixed to an adjustable steel housing with an 1-1/4 in. diameter roller. Used by a variety of glass door manufacturers. | Prime-Line Sliding Door Roller Assembly, 1-1/4 in. Diameter, Steel Ball Bearing... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It is 9/16 in. wide with a 13/16 in. flare, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 10-32 threaded mounting hole on the... ... more | go to store |
 | This is a U-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller in a stamped steel "U" back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or... ... more | go to store |
 | This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
 | This is a unique housing tandem roller assembly used by a variety of manufacturers of sliding patio doors. It has two 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a stamped steel housing with end adjustment . The square shaped... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 19/32 in. wide with a 23/32 in. flare and 1-3/16 in. tall. It is rear adjusting with a 3/16 in. diameter mounting... ... more | go to store |
 | This is a C-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The housing is 9/16 in. wide and 1-3/8 in.... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This aluminum housing with... ... more | go to store |
 | ZORO SELECT 4PE59 Door Track Hanger, 300 lb.,Steel, 1-7/8"L x 1-9/16"W Door Track Hanger, Max. Weight (Lb.) 300 lb, Steel, Bright Zinc Finish, Length (In.) 1 7/8 in, Height (In.) 5 in, Width (In.) 1 9/16 in, Max. Wheel Dia. (In.) 1 7/8 in, Ball Bearings, Number of Wheels 2, Steel, Hardware Included, For Use With Sliding... ... more
ZORO SELECT 4PE59 Door Track Hanger, 300 lb.,Steel, 1-7/8"L x 1-9/16"W Door Track Hanger, Max. Weight (Lb.) 300 lb, Steel, Bright Zinc Finish, Length (In.) 1 7/8 in, Height (In.) 5 in, Width (In.) 1 9/16 in, Max. Wheel Dia. (In.) 1 7/8 in, Ball Bearings, Number of Wheels 2, Steel, Hardware Included, For Use With Sliding... | go to store |
 | This is a 1-1/4 in. diameter concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in. built... ... more | go to store |
 | This is an F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door corner... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the... ... more | go to store |
 | This is an F-tab patio door roller assembly with a 1 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This is two piece roller assembly used on Ador Hilite patio doors. The outer housing is 5/8 in. wide, 31/32 in. tall with a 11/32 in. flare width and has two hook tabs on top. The inner housing holds a 1-1/2 in. steel ball bearing roller. Together,... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare, and 1-5/8 in. height. It is rear adjusting with a threaded mounting hole on the... ... more | go to store |
Ads related to Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel Ball Bearing Single Pack in Brown | 0.38 H x 3.88 W x 4 D in | Wayfair MP1563
